AL6XN Pipe Fittings

AL6XN Pipe Fittings Manufacturers

AL6XN Pipe Fittings Suppliers, AL6XN Pipe Fittings Price

Content

AL6XN Pipe Fittings Stock 

Aakash Steel is Renowned & one of the oldest manufacturers, stockist & suppliers of AL6XN Pipe Fittings have special quality finishing and duress for long life, high pressure and zero defects. All AL6XN Pipe Fittings are offered with a NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at Aakash Steel.We are one of the few manufacturers in India who can weld, bend and form AL6XN Pipe Fittings in various sizes and dimensions.

An ISO 9001:2008 Certified Company, Aakash Steel is a leading stockholder, supplier and exporter of AL6XN Pipe Fittings. AL6XN Pipe Fittings come in various dimension to suit the requirement of our clients and supplied with complete set of mill test reports. Exports is Our Specialty! and we can source many hard to find grades and or non-standards sizes to meet the special requirements of our customers. We, at Aakash Steel, are well known for carrying the highest stock of AL6XN Pipe Fittings in the country. Our excellent goods and services have impressed customers not only in India, but also in other countries.We have the fastest delivery service in the country, giving utmost priority to urgent order

Orders at Aakash Steel are guaranteed fast delivery of the AL6XN Pipe Fittings in the country. The main reason being we have an excellent warehousing and storage facilities for both finished and semi finished goods.They are made ready as per the urgent requirements of the customers. The AL6XN Pipe Fittings are manufactured to sustain very high pressure and product warranty.In 2016 we have stocked 20 tons of AL6XN Pipe Fittings in all sizes, to cater to immediate delivery and urgent needs of the clients. For small requirements we can dispatch the AL6XN Pipe Fittings immediately against the purchase order.

 

 

What is AL6XN Pipe Fittings ?

AL-6XN is an alloy made of nickel, chromium and molybdenum. The percentage of composition of these 3 elements in the alloy is as follows, Nickel 24%, Chromium 22% and Molybdenum 6.3%, with traces of other elements such as Nitrogen. AL6XN is a super austenitic stainless steel with low carbon and high purity. The UNS designation for this alloy is N08367.

AL-6XN shows a good resistance to chloride stress-corrosion cracking due to the high nickel and molybdenum contents. Because of the molybdenum content, it is also resistant to chloride pitting.The nitrogen content serves to further increase pitting resistance and also gives it higher strength than typical 300 series austenitic stainless steels, and thereby often allows it to be used in thinner sections. And the nitrogen content of AL6XN gives it a greater tensile strength than common austenitic stainless steels, while retaining high ductility and impact strength.

AL6XN Pipe Fitting are a range of highly demanded products in extreme environments due to their excellent corrosion resistance properties.AL6XN Pipe Fittings include caps, bends, tees, elbows, bushings, couplings, inserts, plugs, adapters and many more. We are among the Manufacturers, Exporters and Supplier of high quality  AL6XN Pipe Fittings in mumbai, India. We also manufactured these products as per national & international quality standards

AL6XN Pipe Fittings Grade and Specification

Type of AL6XN Pipe Fittings:

Manufacturer of Buttweld Fittings		Size
AL6XN 90° Elbow AL6XN 45° Elbow AL6XN Long Radius Elbow AL6XN Short Radius Elbow AL6XN Reducing Elbow AL6XN 3D Elbow AL6XN 5D Elbow AL6XN Tee (Equal & Unequal) AL6XN Fabricated Tee AL6XN Cross AL6XN Reducing Crosses AL6XN Full Coupling AL6XN Half Coupling AL6XN Pipe Cap AL6XN Union AL6XN Stub Ends (Long & Short) AL6XN 180° LR Return Bends AL6XN 180° SR Return Bends AL6XN Pipe Bends / Piggable Bends	AL6XN Couplings AL6XN Pipe Nipples (Barrel) AL6XN Forged/ Plate Cut Rings AL6XN End Caps AL6XN Forged / Plate Circles AL6XN Reducer Insert AL6XN Reducers AL6XN Concentric Reducer AL6XN Eccentric Reducer AL6XN Boss AL6XN Branch Outlet AL6XN 90° Elbow Outlet AL6XN 45° Lateral Tee AL6XN Lateral Outlet AL6XN Branch Outlet Buttweld AL6XN 90° Elbow Outlet Buttweld AL6XN Lateral Outlet Buttweld AL6XN Nipple Branch Outlet Buttweld AL6XN Dairy Fitting	Sizes 1/2″ – 48″

High Pressure AL6XN Forged Pipe Fittings / Threaded and Socket Weld Pipe Fittings

Manufacturer of Socket Weld Pipe Fittings		Size
AL6XN 90° Elbows	AL6XN Couplings	Sizes 1/8″ – 4″ Pressure Ratings- 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
AL6XN 45° Elbows	AL6XN Reducers
AL6XN Street Elbows	AL6XN Inserts
AL6XN Tees	AL6XN Caps
AL6XN Crosses	AL6XN Unions

Chemical Properties Of AL6XN Pipe Fittings

Cr	Ni	Mo	C	N	Mn	Si	P	S	Cu	Fe
MIN	20.00	23.50	6.00	—	0.18	—	—	—	—	—
MAX	22.00	25.50	7.00	0.03	0.25	2.00	1.00	0.04	0.03	0.75	Balance

Mechanical Properties Of AL6XN Pipe Fittings

Ultimate Tensile Strength, ksi	95
0.2% Yield Strength, ksi	45
Elongation	30
Hardness MAX, HRC	30.5

 

Physical Properties Of AL6XN Pipe Fittings

Density: 0.291 lb/in 3 Melting Point: 2410-2540°F Electrical Resistivity: 535 Ohm-circ mil/ft

Temperature, °F	70	200	300	400	600	700	800
Coefficient* of Thermal Expansion, in/in°F x 10 -6	–	7.9	8.3	8.4	8.6	8.7	8.8
Thermal ConductivityBtu • ft/ft2 • hr • °F	6.7	7.5	8.1	8.7	10.0	10.6	11.2
Modulus of Elasticity, Dynamic psi x 10 6	28.3	27.4	–	26.1	24.8	–	23.4

Typical Tensile Properties Of AL6XN Pipe Fittings

Temperature, °F	-450	-320	70	200	400	600	800	1000
Ultimate Tensile Strength, ksi	218.0	196.0	108.0	99.9	90.3	86.0	87.0	83.6
0.2% Yield Strength, ksi	142.0	107.0	53.0	49.4	40.4	36.3	36.0	34.0
Elongation, %	36	49	47	47	46	47	48	50
Charpy Impact V-notch, ft-lbs	322*	85	140	—	—	—	—	—

 

Type Of Pipe Fttings Available At Aakash Steel

AL6XN Pipe Fittings Value Added Services

• Polish (Electro & Commercial)
• Heat Treatment
• Annealed
• Pickling, Polish
• Rolling
• Bending
• Forging
• Minor Fabrication Etc.

 

 

Price of AL6XN Pipe Fittings

• 904L/254SMO stainless steel fastener flat washer 1.4529 /AL6XN 500 Kilograms (Min. Order)
• AL6XN weldolet sockolet threadolet US $0.1-10000 / Piece
• stainless steel pipe fitting BS4825 welded elbow with straight end US $0.035-46 / Piece
• Satin/mirror finish stainless steel fitting 22.5 degree pipe elbow US $0.5-6 / Piece
• stainless steel nipple pipe fitting / cross connector tube fitting US $0.5-1 / Piece
• good quality 90 degree elbow stainless steel pipe fittings US $0.35-800 / Piece
• stainless steel pipe fittings/forged pipe fittings/malleable iron pipe fitting US $0.2-99 / Piece
• stainless steel 4-way cross pipe fitting US $1000-2000 / Ton
• maketing competitive stainless steel seamless pipe fittings 2b finish US $1800-3200 / Ton
• polished finish 304 material stainless steel pipe joint US $1000-3000 / Ton
• Stainless Steel 90 degree elbow,elbow 90, Hydraulic,Sanitary,Mirror Finish US $5-50 / Piece
• ISO9001 standard mirror finish 22.5 degree elbow US $8-13 / Piece
• NO.1 finish 304/304L stainless steel plate US $1000-3000 / Ton
• 4 inch 316 stainless steel pipe fittings US $3500-5000 / Ton
• polished finish 304 material stainless steel pipe joint US $1000-3000 / Ton

 

Typical Application of AL6XN Pipe Fittings

• Chemical processing
• Oil and gas
• Desalination
• Water piping systems
• Transformer cases in marine environments
• Food processing equipment
• FGD scrubbers
• Reverse osmosis
• Heat exchangers

 

AL6XN Pipe Fittings Packaging & Shipping

Each order is packaged according to the customer’ s standards including preparation for export such as wooden case, pallet or according to customer’s requirement All shipping documentation is provided for AL6XN Pipe Fittings delivery from mill to customer.

Every assignment begins with a visit of our experienced sales representative who assesses the volume / weight of the belongings and brief the client about the nature of packing required as well as various documentation formalities when moving from India..Products are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All fittings are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on our products

Supply Area :

We Supply Our AL6XN Pipe Fittings to various countries like USA, India, UAE, Saudi Arabia, Singapore, Iraq, Turkey, Indonesia  

Quality Assurance & Test Certificate

All AL6XN Pipe Fittings  are 100% inspected to from the starting point to maintain  a good quality.Packing of AL6XN Pipe Fittings are packed our all material in wooden box wraps with foam paper as well as plastic, newspaper ,Plastic bubble wrap according to need of customer need.

We also provide NACE 3.1 Certification for AL6XN Pipe Fittings only along with the goods.Manufacturer Test Certificate according to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

AL6XN Pipe Fittings Ready Stock Available

 

AL6XN Pipe Fittings Origin & Manufacturers

Origin: Indian Origin, European Origin, Japanese Origin, US Origin, Korea Origin, Thailand Origin, Taiwan Origin Manufacturers:

 

Our Specialization in AL6XN Pipe Fittings

Long Bend with Radius – R = 3D, 5D & 10D Pigabble Bend & As per your drawing

AL6XN Pipe Fittings Available Finish

2B,BA ,HL ,8K, No.3 Finish, No.4 Finish

 

AL6XN Pipe Fittings | Emergency Suppliers AL6XN Pipe Fittings | AL6XN Pipe Fittings Suppliers | AL6XN Pipe Fittings Stockists | AL6XN Pipe Fittings Exporters | AL6XN Pipe Fittings Manufacturers | AL6XN Pipe Fittings Latest Price

Contact Aakash Steel today for a best offer & competitive quotation.. Call: +91-9833873143 | +91-022-66394990 / 67496172 / 73 | Email: info@aakashsteel.co.in